| Main > Main Forum |
| **FINISHED** Re-Vamping my Control Panel, any advice on my concept designs?... |
| << < (4/5) > >> |
| Chris:
From my own experience: You WILL catch your fingers on that spinner knob playing Golden Tee. |
| FrizzleFried:
One was a HAPP Super the other a Competition. But they have both been replaced by two blue comps. |
| GoPodular.com:
Countersink Carriage VS Wood Screw from Bottom: Use the countersink method. Trust me. We've tried every possible method for making the bolts disappear and screwing from the bottom is the *worst* option. Countersinking some bolts is a 1000x more secure. You could also go with T-nuts. |
| BamBam:
I have a similar setup and I use the trackball with my right hand. When playing golf, my hand hits the player two joystick. John |
| postalp123:
Managed to get it almost complete over the weekend, functional at least: The old CP: :'( : WARNING: Disclaimer, what you are about to see are the hideous remains of the worst wiring job I have ever done, prepare yourself!: The new shell carved out and ready for the hardware: Joystick Bases, Buttons, Trackball & Spinner Installed: I-Pac 4 & Druin Board Mounted: Wiring Installed (Red=1P, Green=2P, White=Admin, Coin, Start): HAPPs Rotary's Installed and Connected to the Druin Board: Ground Wiring Installed (Black): VOILA-ish: Still have the asthetics to do (Painting, Overlay should arrive soon). I tried her out, and I must say, everything works great! The spinner doesn't get in the way of my Golden Tee Madman-like trackball use. And since I mounted the spinner directly above the trackball, I play some driving games with one hand on the spinner (Steering) and the other on the trackball underneath (Analog Gas Pedal) it seems to work rather well. :cheers: |
| Navigation |
| Message Index |
| Next page |
| Previous page |