Main > Main Forum
Best Buy 27" Insignia is on sale for $190 (down from $235)
Chunce DeLeone:
Rubber.....can you please post your service menu setting!!!!!! :notworthy: I have the same TV and I have gotten the Vertical height of the screen to where I want it but the horizontal is still an inch short on each side, every time I fool with the Service menu I get weird curves and distortion along the sides
Also Great tip on the red bleed, I have seen this especially with Robotron where the robots look like road flares, I will try the red bias decrease,,,,
I also know that your service menu setting will be different from mine but Atleast I could be in the ballpark and maybe find out what I am missing .....Thank You
rubberpoultry:
At first I had the resolution set to 640x480, and I never could fill the screen right. When I changed it to 640x432 that solved my problems (after retweaking the service menu). 640x480 looked blurry, 640x432 looked crisp. So if you can, switch to that resolution.
Also I was wrong about changing the red bias. I actually changed the Red DRV.
Here are my service menu settings:
OSD H 1
OSDC 6
H.POSI 17
H. BLK L 1
H. BLK R 1
V. SIZE 73
V. POSI 1
V. LIN 12
V. CORR 10
V. COMP 2
R. BIAS 130
G. BIAS 133
B. BIAS 130
R. DRV 3
G. DRV 0
B. DRV 25
BRI. CENT 60
BRI. MAX 75
BRI. MIN 72
CONT. CENT 127
CONT. MAX 127
CONT. MIN 127
COL. CENT 126
COL. MAX 127
COL. MIN 18
TINT CENT 66
SHARP. CENT 60
SHARP MAX 39
SHARP MIN 25
SUB BIAS 0
H. SIZE 41
PARABOLA 17
TRAPEZIUM 37
COR TOP 5
COR BTM 6
TEST STEREO 0
TEST AUDIO 0
FREQ 1
Hope this helps someone!
RubberP
acevedor2:
So based off of this I think I am going to go and get the 27 inch flat tube tv they have at Best Buy on sale now. It is the same INSIGNIA brand SDTV, but it is a flat tube. I am hoping the HAPP 27inch flat tube bezel will fit. It is on sale now for 229. That and the fact that I have 150 bucks in Best Buy Gift Cards from Christmas make it a very attractive option! I really like the look of that smoked glass. How thick is it?
rubberpoultry:
The glass is 1/4" thick.
acevedor2:
Great, only problem I have is that I just looked at the width of the flat tube tv and it is too wide for the cab. Back to the drawing board. I want a billabs tri mode 27 flat monitor but it is 600 bucks!