| Main > Main Forum |
| KeyWiz - IPac - Keyboard Hack ... which to choose? |
| << < (6/6) |
| urbecrisch:
I still haven't found a good tutorial for wiring solderless controls. The arcadecontrols.com wiring hyperlink is old and outdated. I'm a fast learner and already figured out the gauge of wiring and in what lengths, female quick disconnects, but I'm not sure how to wire the ground. I'm assuming there is a ground on the keywiz but where do you ground it to? |
| Kaytrim:
Once you connect all the common (ground) connections together and then to the ground point on the keywiz you are done with the ground connection. Look at the image below. This is the underside of some of my panels. The switches ground points (common) are daisy chained together then to the my interface board (not in the pic) Then each of the normally open connections are connected directly to a point on the interface board. The joystick in the background is done the same. The spinner in the front is not part of this discussion and is wired differently. I hope this helps. :cheers: |
| Navigation |
| Message Index |
| Previous page |