| Main > Main Forum |
| Anyone using a RoadBlasters yoke with your cab? |
| << < (4/5) > >> |
| Ninten-doh:
Hmmm... If I left the optical stuff in place, and added a gear/potentiometer on the other side, could I somehow make this into a dual 270/360 wheel? Probably not because the restrictors keep it from being a true 360 wheel, and I need the restrictors for the 270.. I REALLY must learn to stay focused. :P |
| Kremmit:
Maybe you can skip a 2nd gear completely and mount a pot in the center of that hole the wires come out of. A little gob of JB-Stik epoxy putty or similar should do it- then you just need to make a metal bracket to hold the other side of the pot still. |
| Ninten-doh:
Okay, I'm finally going to give a go at making this Roadblasters yoke a 270 wheel. It's got the same 60 tooth gear that the Star Wars yoke has. Any ideas on how I figure out/calculate which gear I need to buy to "mate" with it for the potentiometer? Any suggestions on where to look online for gears? Thanks much! :cheers: |
| PoDunkMoFo:
If it has the same tooth on the large gear as Starwars then you should be able to use the same size gear for the small one. |
| Ninten-doh:
PoDunk, so if I found a small gear like the small gear on the Star Wars yoke, that should do the trick for a 270 pot? |
| Navigation |
| Message Index |
| Next page |
| Previous page |