| Main > Main Forum |
| New Product: TurboTwist 2 - The Ultimate Spinner / Paddle control ! From GGG! |
| << < (17/62) > >> |
| squirrellydw:
I am all for a lighted top :applaud: :notworthy: :cheers: |
| whammoed:
Randy, still curious about this...I was thinking of plugging in a trackball on this as well... --- Quote from: whammoed on November 28, 2006, 06:35:35 pm --- --- Quote from: RandyT on November 28, 2006, 06:01:01 pm --- Yes, but you will need to add a couple of pull-down resistors and you'd be limited to the Z-Axis unless you use a switch to share the X or Y axis. --- End quote --- Pull down resistors? So the optiwiz used on the spinner is different than the regular optiwiz in some way? Did you have to modify things a bit to get the encoder to function properly? --- End quote --- |
| RandyT:
--- Quote from: whammoed on November 29, 2006, 12:01:41 am ---Pull down resistors? So the optiwiz used on the spinner is different than the regular optiwiz in some way? --- End quote --- Yes. The included Opti-Wiz is "special" because it has been modified to be more of a dedicated spinner interface to the TurboTwist 2. A trackball can still be used, but will probably require a resistor between each data line and ground before going to the interface. RandyT |
| shmokes:
--- Quote from: RandyT on November 28, 2006, 02:04:05 am --- this unit is about as high-tech as it gets.. --- End quote --- ;D |
| vrf:
--- Quote from: RandyT on November 28, 2006, 10:54:49 pm --- --- Quote from: vrf on November 28, 2006, 10:08:36 pm ---Anyhow, would you consider shipping to Taiwan? --- End quote --- Try it now. --- End quote --- Thank you! Order placed. I'll look forward to receiving it. |
| Navigation |
| Message Index |
| Next page |
| Previous page |