Main > Main Forum

New Product: TurboTwist 2 - The Ultimate Spinner / Paddle control ! From GGG!

Pages: << < (52/62) > >>

RandyT:


--- Quote from: JoyMonkey on December 17, 2006, 01:45:33 pm ---One question; how easy is it to pop out the token and put in another one?

--- End quote ---

Not.  If you think this would be desirable, make sure you request that the token be included loosely so you can use your own methods for keeping it in the knob.  I use a pencil eraser sized spot of superglue gel.  It could probably be removed by putting the knob in the freezer overnight and then blasting the center of the token with a torch.  Should flex the metal enough to pop it loose, but I'm not trying it.  :)

RandyT



JoyMonkey:

Good to know. I think I'll order a naked knob (forgive the pun) and use a small dab of silicone to keep a token on there.

Derrick Renaud:

Randy,

When not using your Opti-Wiz based board, can the Red/Black wires be directly connected to 5V?  Or do they need a resistor in-line.

I am assuming no.  That there already is a resistor in the spinner housing.

Thanks,
D.

RandyT:


--- Quote from: Derrick Renaud on December 19, 2006, 05:58:59 pm ---When not using your Opti-Wiz based board, can the Red/Black wires be directly connected to 5V?  Or do they need a resistor in-line.

--- End quote ---

You assume correctly.  They can be connected directly to 5v.

RandyT

Donkey_Kong:

Santa came early...looks like someone was a good boy this year!

Arrival was QUICK and contents all accounted for perfectly. Special requests...umm yep! Now if they could just magically mount themselves to my un-built CP...

Thanks GGG...Merry X-mas to ALL!!

Dang do you SEE  :o that BYOAC token...inside of that knob!
That is 'HIGH CLASS' my friend. I'm truly... :notworthy: But what the heck eh.

Pages: << < (52/62) > >>

Go to full version