| Main > Main Forum |
| New Product: TurboTwist 2 - The Ultimate Spinner / Paddle control ! From GGG! |
| << < (47/62) > >> |
| Havok:
--- Quote from: Tiger-Heli on December 14, 2006, 07:01:28 am ---Invert your invaders design - i.e. instead of a blue invader on a brushed metal background, a Silver Invader on a black background. --- End quote --- I second that one !!! |
| RayB:
--- Quote from: Time Pilot on December 15, 2006, 09:15:20 am ---Randy, this is one cool spinner! Could you be more specific on what needs to be done to connect a trackball to the new OptiWiz (specifically a Happ). You mentioned popping a resistor across the data lines before the trackball is connected. What would the recommended resistor values be? It would be fantastic to use the Spinner on Z and the Trackball on X/Y- it would replace my serial Opti-Pac and my problem of mouse IDs switching would be solved. So many problems solved at once makes the TT2 cheap! :dizzy: :notworthy: Wohooo! --- End quote --- Should be a whole new thread. |
| RandyT:
--- Quote from: Time Pilot on December 15, 2006, 09:15:20 am ---Could you be more specific on what needs to be done to connect a trackball to the new OptiWiz (specifically a Happ). You mentioned popping a resistor across the data lines before the trackball is connected. What would the recommended resistor values be? It would be fantastic to use the Spinner on Z and the Trackball on X/Y- it would replace my serial Opti-Pac and my problem of mouse IDs switching would be solved. So many problems solved at once makes the TT2 cheap! :dizzy: :notworthy: --- End quote --- The resistor thing was before I did any trackball testing with the modified hardware. I tried both an Atari and Betson/Imperial trackball and they work fine on the Master board with no modifications. I haven't specifically tried the HAPP, so I can't say for sure. But I have high expectations ;) RandyT |
| nostrebor:
--- Quote from: RandyT on December 15, 2006, 11:26:09 am --- --- Quote from: Time Pilot on December 15, 2006, 09:15:20 am ---Could you be more specific on what needs to be done to connect a trackball to the new OptiWiz (specifically a Happ). You mentioned popping a resistor across the data lines before the trackball is connected. What would the recommended resistor values be? It would be fantastic to use the Spinner on Z and the Trackball on X/Y- it would replace my serial Opti-Pac and my problem of mouse IDs switching would be solved. So many problems solved at once makes the TT2 cheap! :dizzy: :notworthy: --- End quote --- The resistor thing was before I did any trackball testing with the modified hardware. I tried both an Atari and Betson/Imperial trackball and they work fine on the Master board with no modifications. I haven't specifically tried the HAPP, so I can't say for sure. But I have high expectations ;) RandyT --- End quote --- I was getting ready to ask this myself... Thanks for checking them out for us! |
| PoDunkMoFo:
Is there really a better reason to have a spinner? |
| Navigation |
| Message Index |
| Next page |
| Previous page |