| Main > Main Forum |
| rehabing Nintendo joysticks - grease or oil? |
| << < (3/5) > >> |
| Level42:
--- Quote from: CheffoJeffo on August 03, 2007, 07:41:57 am --- --- Quote from: missi0ncontrol on November 13, 2006, 02:38:58 am ---I used bearing grease for mine, but then again mine are still sitting in a shoe box waiting for me to get productive on my cabinet --- End quote --- And for a certain chef to go to the post office and mail that restrictor plate ... ::) My personal choice for rehabbing Nintendo sticks is shown below ... >:D --- End quote --- OK, so what do you replace them with, that is, if you're bothered to keep the same look ? |
| SavannahLion:
--- Quote from: shardian on August 03, 2007, 08:56:53 am ---There is an inherent design flaw when you have to grease a frikkin joystick. --- End quote --- There's nothing wrong with the design. It's either because the operator doesn't have enough patience or someone removed some important bits from the joystick. |
| NoOne=NBA=:
Heavy grease can prevent some joysticks from recentering properly. I know the Seimitsu's are prone to this. I'm not sure about the Nintendo ones though because I use a light lithium grease to keep it from happening. |
| nate1749:
--- Quote from: SavannahLion on August 03, 2007, 06:42:27 pm --- --- Quote from: shardian on August 03, 2007, 08:56:53 am ---There is an inherent design flaw when you have to grease a frikkin joystick. --- End quote --- There's nothing wrong with the design. It's either because the operator doesn't have enough patience or someone removed some important bits from the joystick. --- End quote --- Can you elaborate on what you said. I thought they all needed grease, but if I just need 'patience,' I can wait until it feels right, but can you explain that. BTW - mine is of course a simple 4 way design, not an 8 way like the original poster. Thanks Kermitt, I should have guessed that was the problem. Nate |
| Ponderosa:
I have a few of those joysticks too. I actually kind of like them. I'm not currently using any of them in my cabinet, because I didn't have good luck using them with 4-way games. Instead, I have happ supers with ball tops set to 4 way. The question I have is, does anyone know where to get 4 way restrictors for the nintendo sticks? All 4 of these sticks have 8 way restrictors attached, but you can see how a 4 way restrictor could be attached the the stick in lieu of the 8 way. I've done some searching and have come up empty. OR, has anyone figured out a good way to use them in 8 way mode with 4 way games (such as pacman) ??? For anyone who's interested, my panel is a modified nintendo vs. unisystem panel (two players, with additional buttons, and adapted for happ sticks). Thanks, John |
| Navigation |
| Message Index |
| Next page |
| Previous page |