Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: How to run Wincab in AtomicFE  (Read 10594 times)

0 Members and 1 Guest are viewing this topic.

Chris

  • Moderator
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4575
    • Chris's MAME Cabinet
How to run Wincab in AtomicFE
« on: November 07, 2006, 01:27:48 pm »
This was sent to me by fuadramsey, who is currently unable to login; he asked me to post it here on his behalf.  Thank you for the submission, fuadramsey!



How to run Wincab in AtomicFE

You need to run Wincab from a batch file. First create a batch file that changes to the jukebox folder, and runs the jukebox.” To create a batch file just create a text document with the following syntax, but change the directories to your needs. Also change the extension of the file name from .txt to .bat (runwincab.bat). Here is my example of what is in the batch file:

 
Code: [Select]
C:
cd \
cd wincab
wincab.exe

The first line changes to the C drive. The second line goes to the root directory of this drive. The third line switches to the directory “wincab.” The fourth line runs “wincab.exe.”  Save this file in a folder. You will point AtomicFE to this file next.
 
You will need to run Wincab from the bat file you just created. You can do this by using the AtomicFE configuration tool AtomicManager.exe. Check the “advance options” on the “General” tab. The “External Commands” tab will pop up. Go to it and click the “User Action” tab. Check the “run program when custom key 1 is pressed” and point the command to run the bat file you just created. Here is my example “C:\emulators\atomicfe\bat\runwincab.bat” (I saved my bat file created above to a folder named “bat” inside of the atomicfe folder).

Save everything and when you press the custom key 1 (definable with AtomicKeys) when AtomicFE is running, Wincab will run. You return back to AtomicFE once you hit escape in Wincab.
--Chris
DOSCab/WinCab Jukebox: http://www.dwjukebox.com

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31