Main > Main Forum

Can I use a Dream Arcade shaft and balltop in an Ultimarc 360 or Mag-Stik?

Pages: << < (2/3) > >>

AndyWarne:

The ball tops do fit the T-Stik and Mag-Stik but you need to order the replacement shafts which we supply. On the UltraStik you can just unscrew the ball but on the replacement shafts for the T-Stik and Mag-Stik you cannot, and would need to request that we send a shafy without the ball fitted.
Andy

destructor:

Yes Andy, you should sell Mag-Stiks and T-Stik with ball-tops handles where we can unscrew tops (ball or bat). And it should be default.

After some time ball on my T-Stik Plus have burst in place where ball is connected with shaft. I think that there is pressure between shaft, ball and material which connect ball with shaft.

Kowal must made new shafts for Mag/T-Stiks where we can use seimitsu bubble balls for example. :)

Aurich:


--- Quote from: destructor on November 09, 2006, 06:38:27 am ---Yes Andy, you should sell Mag-Stiks and T-Stik with ball-tops handles where we can unscrew tops (ball or bat). And it should be default.
--- End quote ---
IIRC the issue is that Andy "glues" the balls on so they don't come loose when you use the mechanical switching action of the stick, which makes sense.

javeryh:

Just so I'm sure, I don't need an ipac with the Ultimarc 360, right?  I'm planning on 3 action buttons and 4 admin buttons (maybe a 5th for power on and off but right now I'm planning to just wire straight to the computer).

Thanks!!

fatfingers:


--- Quote from: javeryh on November 09, 2006, 04:45:42 pm ---Just so I'm sure, I don't need an ipac with the Ultimarc 360, right?  I'm planning on 3 action buttons and 4 admin buttons (maybe a 5th for power on and off but right now I'm planning to just wire straight to the computer).

Thanks!!

--- End quote ---

I'm almost certain the ultrastiks can handle 7, maybe even eight buttons.

Pages: << < (2/3) > >>

Go to full version