Main > Main Forum
Can I use a Dream Arcade shaft and balltop in an Ultimarc 360 or Mag-Stik?
<< < (3/3)
JustMichael:

--- Quote ---Just so I'm sure, I don't need an ipac with the Ultimarc 360, right?
--- End quote ---

Correct.  The Ultimarc 360 comes with its own USB interface.


--- Quote ---I'm planning on 3 action buttons and 4 admin buttons (maybe a 5th for power on and off but right now I'm planning to just wire straight to the computer).
Thanks!!

--- End quote ---

The Ultimarc 360 can have up to 8 individual buttons hooked up to it.  The PC power button should not be hooked to the Ultimarc 360.
destructor:

--- Quote from: Aurich on November 09, 2006, 12:18:19 pm ---
--- Quote from: destructor on November 09, 2006, 06:38:27 am ---Yes Andy, you should sell Mag-Stiks and T-Stik with ball-tops handles where we can unscrew tops (ball or bat). And it should be default.
--- End quote ---
IIRC the issue is that Andy "glues" the balls on so they don't come loose when you use the mechanical switching action of the stick, which makes sense.

--- End quote ---
It makes sense otherwise, but this solution (glue) isn't good.
AndyWarne:
Des, can you suggest a better method? I can't think of one. We use Locktite Threadlock actually. On the Mag-Stik, because it must be able to be turned to allow 4-8 way switching from the top, the ball would simply unscrew if not locked on somehow.
Andy
destructor:

--- Quote from: AndyWarne on November 11, 2006, 02:51:07 pm ---Des, can you suggest a better method? I can't think of one. We use Locktite Threadlock actually. On the Mag-Stik, because it must be able to be turned to allow 4-8 way switching from the top, the ball would simply unscrew if not locked on somehow.
Andy

--- End quote ---
I think about it still. If I found something better I will inform you Andy.
Switching to right side isn't problem because metric screw is right (clock). Problem is with switch to left side only.

PS. In free time I show photo how my T-Stik ball is damaged.
Navigation
Message Index
Previous page

Go to full version