Main > Main Forum

Taito Cocktail Plans *Sketch inside*

Pages: << < (4/5) > >>

hbm*rais:

John,

Thanks a lot. That's way more than I could expect. Tonight I'm gonna hit SketchUp with this measurements and see what comes out  ;D .

Just one quick question: I see you excluded the corners and measured only the main panels. How much you'd say the corners add to the total size? It seems like 1 1/4" or 1 1/8" each.

hbm*rais:

I did a quick sketch with all the measurements John sent me and a little bit of guesswork. I hope it's useful to somebody.



spacies:


Nice work,

I saved it and put it on my 'want'  list.

I think I should get around to this in approx 5-6 years, LOL.



johnm160:


--- Quote from: hbm*rais on October 30, 2006, 10:00:19 am ---John,

Thanks a lot. That's way more than I could expect. Tonight I'm gonna hit SketchUp with this measurements and see what comes out  ;D .

Just one quick question: I see you excluded the corners and measured only the main panels. How much you'd say the corners add to the total size? It seems like 1 1/4" or 1 1/8" each.

--- End quote ---

Closest to 1 1/4

I had a close up pic of the corners on my site for you. There are a lot more pics there then I posted here.
http://www.arcadehobby.com/cocktail/EPSN0084.JPG

If you need anything else let me know, I will be there again tomorrow afternoon.

Nice looking sketch btw!

hbm*rais:

Hi John,

Yes, I saw that picture after posting. I should have edited my post  :-[, sorry.

I have all the information I need for myself right now, but if you want to take some measurement of the CP's opening and the coin box opening, I can add it to the sketch for completeness sake. It may be useful for someone else.

Thanks again for everything!

Pages: << < (4/5) > >>

Go to full version