Main > Main Forum
Taito Cocktail Plans *Sketch inside*
<< < (4/5) > >>
hbm*rais:
John,

Thanks a lot. That's way more than I could expect. Tonight I'm gonna hit SketchUp with this measurements and see what comes out  ;D .

Just one quick question: I see you excluded the corners and measured only the main panels. How much you'd say the corners add to the total size? It seems like 1 1/4" or 1 1/8" each.
hbm*rais:
I did a quick sketch with all the measurements John sent me and a little bit of guesswork. I hope it's useful to somebody.

spacies:

Nice work,

I saved it and put it on my 'want'  list.

I think I should get around to this in approx 5-6 years, LOL.

johnm160:

--- Quote from: hbm*rais on October 30, 2006, 10:00:19 am ---John,

Thanks a lot. That's way more than I could expect. Tonight I'm gonna hit SketchUp with this measurements and see what comes out  ;D .

Just one quick question: I see you excluded the corners and measured only the main panels. How much you'd say the corners add to the total size? It seems like 1 1/4" or 1 1/8" each.

--- End quote ---

Closest to 1 1/4

I had a close up pic of the corners on my site for you. There are a lot more pics there then I posted here.
http://www.arcadehobby.com/cocktail/EPSN0084.JPG

If you need anything else let me know, I will be there again tomorrow afternoon.

Nice looking sketch btw!
hbm*rais:
Hi John,

Yes, I saw that picture after posting. I should have edited my post  :-[, sorry.

I have all the information I need for myself right now, but if you want to take some measurement of the CP's opening and the coin box opening, I can add it to the sketch for completeness sake. It may be useful for someone else.

Thanks again for everything!
Navigation
Message Index
Next page
Previous page

Go to full version