Author Topic: Control Panel Database: Post a picture of your Control Panel! (Read 753121 times)

Fozzy The Bear · « **Reply #280 on:** January 31, 2008, 09:27:41 am »

Quote from: Minwah on January 31, 2008, 08:55:32 am

Quote from: patrickl on January 31, 2008, 08:16:23 am
Looks pretty slick. Love how you incorporated the steering wheel in the CP. Unfortunately it's on the wrong side

I will pretend I didn't see that....

I saw it!!

Damned colonials, they just haven't got a clue... It's all the salt water tea, it rots their brains you know...

Best Regards,
Julian (Fozzy The Bear)

fatfingers · « **Reply #281 on:** February 03, 2008, 03:55:37 pm »

Just finally finished my control panel today. Basic Lusid control panel with sweet artwork by Pixelhugger. Thanks Pixel!

wp34 · « **Reply #282 on:** February 03, 2008, 05:52:58 pm »

Fatfinger: Looks great. I assume those are U360's. Where did you get the ball tops?

fatfingers · « **Reply #283 on:** February 03, 2008, 08:01:36 pm »

Thanks! Yes, they are U360s....I can't exactly remember where I got them, but it was somewhere in Japan...

Something like ahikibarashop?

Fozzy The Bear · « **Reply #284 on:** February 04, 2008, 01:57:21 pm »

Quote from: fatfingers on February 03, 2008, 08:01:36 pm

Something like ahikibarashop?

http://www.akihabarashop.jp
http://www.akihabarashop.com

Unfortunately the dot com one now just reads UPDATING and the JP one reads Coming Soon.

Akihabara is a district of Tokyo that mostly consists of electronics retail stores, and the arcade parts shop is located 100 yards from Akihabara station on the Tokyo loop line. So the only way you're going to be purchasing from them right now is to get a plane to Tokyo and..... you get the idea....

Best Regards,
Julian (Fozzy The Bear)

Kajoq · « **Reply #285 on:** February 04, 2008, 06:53:48 pm »

The guy who runs Akihabarashop posts frequently on the forums on shoryuken. His username is "The Real Neo Geo"

If you check out the trading forum there you can find a thread completely about their "shop". It might tell you when they're going to be back up and running, or if hes doing any orders when the site is down

weisshaupt · « **Reply #286 on:** February 05, 2008, 10:12:16 am »

My CP...

and Project thread
http://forum.arcadecontrols.com/index.php?topic=75411.0

Kajoq · « **Reply #287 on:** February 05, 2008, 11:43:05 am »

Now thats a sweet control panel. very nice and original work.

chrimeg · « **Reply #288 on:** February 06, 2008, 10:21:19 pm »

Well here is the start of mine. I managed to buy the cab with all the controls etc for $50.00. Only thing was the monitor was dead. So I just gutted the cab and added a 27" TV and mounted a PC for MAME.

Anyhow my panel is going to modular so here is its beginings.....

chrimeg · « **Reply #289 on:** February 06, 2008, 10:26:33 pm »

Now some of the modular panel which can be swapped via din connections etc when done. I figure the whole panel can be swapped in about 30 secs to 1 minute

lokesen · « **Reply #290 on:** February 09, 2008, 11:45:56 am »

Just finished my new controls today. I have done the artwork in Illustrator myself. I have used a x-arcade PCB and 2 sanwa balltop joysticks. Hope you like it.

You will find more pictures here:
http://www.koenigs.dk/mame/eng/

Minwah · « **Reply #291 on:** February 11, 2008, 04:56:17 am »

Quote from: lokesen on February 09, 2008, 11:45:56 am

Just finished my new controls today. I have done the artwork in Illustrator myself. I have used a x-arcade PCB and 2 sanwa balltop joysticks. Hope you like it.

Looks really nice...I like the style of your artwork, it's the kindof thing I would like to do for my joystick panel.

stan2323 · « **Reply #292 on:** February 11, 2008, 09:12:00 pm »

I have almost finished my control panel. The only thing left to do is wire it up!!!

I love the way the poster came out. The edge where the poster is short will be covered with some trim when the cabinet is done.

langdoguk · « **Reply #293 on:** February 12, 2008, 06:35:52 pm »

Here's my first attempt , made a bit of a

with the artwork ,just didn't know how do it

.
But it was good fun and I'm sure the kids will like it

spicolli · « **Reply #294 on:** February 12, 2008, 10:27:02 pm »

Well i have been crawling around for some time and just got around to getting my CP together. I love the supercade type of double decker CP! So i looked and looked until i felt i could take some of the most usable ideas and put them into one! its all wired up and ready to go i just haven't had time to program it yet! i should have time soon!

Well let me know what ya all think!

I have lots more pics of the build up! I plan on posting more soon!!!

Goshen · « **Reply #295 on:** February 17, 2008, 10:56:10 pm »

spicolli, That is a great looking machine, do you have a project page?

DARRYLICSHON · « **Reply #296 on:** February 20, 2008, 03:53:51 pm »

Quote from: stan2323 on February 11, 2008, 09:12:00 pm

I have almost finished my control panel. The only thing left to do is wire it up!!!

I love the way the poster came out. The edge where the poster is short will be covered with some trim when the cabinet is done.

nice i like , can't go wrong with star trek

spicolli · « **Reply #297 on:** February 21, 2008, 07:11:06 pm »

Quote from: Goshen on February 17, 2008, 10:56:10 pm

spicolli, That is a great looking machine, do you have a project page?

No project page yet! but that sounds like a great idea! when i get some free time i think i'll do that!
Also, thanks!!

JinxedSoul · « **Reply #298 on:** February 24, 2008, 09:02:34 pm »

Quote from: Santoro on November 13, 2007, 11:49:54 am

This is my best CP to date.

Is this a metal control panel if so what are the dimensions? I'm looking to make a metal control panel similar to yours. I just wasn't sure if i could fit it all in. I would love to see more pictures of that machine looks great.

bent98 · « **Reply #299 on:** February 24, 2008, 09:17:07 pm »

Goshen · « **Reply #300 on:** February 25, 2008, 10:27:47 am »

spicolli, Will you please measure your control panel and give the measurements? I love it!

And what is that symbol on the middle, it really gives it character.

You mentioned in another thread that you are making a mark II? Can you share details on that?

roelieboelie · « **Reply #301 on:** February 26, 2008, 02:31:03 pm »

My CP:

The control panel overlay is not fitted. This will be the correct overlay size: *click*

spicolli · « **Reply #302 on:** February 27, 2008, 11:55:48 pm »

Quote from: Goshen on February 25, 2008, 10:27:47 am

spicolli, Will you please measure your control panel and give the measurements? I love it!

And what is that symbol on the middle, it really gives it character.

You mentioned in another thread that you are making a mark II? Can you share details on that?

I will get the information you need soon!
sorry for the delay but been working lots!
As far as a mark II. i think you have me confused with another person on the board! But thats OK!

Umpa · « **Reply #303 on:** February 28, 2008, 12:12:06 pm »

I built this about 5 months ago. I still need to put cup holders on the sides. The 2 red balls on the front allow players 1 and 2 to switch between 4-way and 8-way joystick positions.
Thanks to arzoo and his Arcade Addiction and also thanks to Supercade for the inspiration.

spicolli · « **Reply #304 on:** February 28, 2008, 01:13:57 pm »

The measurements are:

Top 31Wx12L the front is 21W

the area from the back to the angle cut is 7 7/8L
the remaining of the angle is left over from the 12L measurement
also it is 3 tall (just the same hight of my J-sticks

Bottom 44Wx20L and the front is 23 5/8W

the area from the back to the angle cut is 9 3/4L
the remaining of the angle is left over from the 20L measurement

Box 4 1/4 deep in the back and 3 deep in front
the sides is 3/4 under the CP (clearance on both sides)
the front has 1 1/4 lip clearance (to fit the hinge)

What i did was make the top of the CP and then the box! this gave me a better idea on room for controls and the foot print under the CP

more to follow when i get more time to post!

also, Umpa you CP looks good!

muffin man · « **Reply #305 on:** March 07, 2008, 12:50:24 am »

simple

Miguelsluma · « **Reply #306 on:** March 07, 2008, 08:31:45 am »

my space harrier/homtown skyline themed CP

LoyalistRevolt · « **Reply #307 on:** March 08, 2008, 12:58:02 pm »

Here is one I made

parts from muffin man

Antropus · « **Reply #308 on:** March 09, 2008, 06:44:36 pm »

I finished my machine yesterday so here's my contribution to this thread. For more details about my little project, please visit: http://forum.arcadecontrols.com/index.php?topic=77321.0

-Kris

robC · « **Reply #309 on:** March 12, 2008, 08:13:49 am »

My cab is complete, and here is the CP. Nothing original, just cloning what works!
My project thread:
http://forum.arcadecontrols.com/index.php?topic=75782.0

QuarterJunkie · « **Reply #310 on:** March 12, 2008, 08:57:38 am »

All very nice Control panels..

Here is my contribution. In the same vein as bent98...

bent98 · « **Reply #311 on:** March 12, 2008, 11:27:05 am »

Quarter thats sweet. Repalce those buttons with Novagems

QuarterJunkie · « **Reply #312 on:** March 12, 2008, 02:15:49 pm »

Quote from: bent98 on March 12, 2008, 11:27:05 am

Quarter thats sweet. Repalce those buttons with Novagems

Heh Heh. Yours do look cool! Maybe someday...

Ginsu Victim · « **Reply #313 on:** March 17, 2008, 08:19:45 am »

Finished my control panel last night. I don't have the rest built yet, only the top. I like how Juggernaut's head was the perfect spot for the spinner.
EDIT: I've changed the Happy Universal joysticks to U360 Balltops and added another white button (next to player 2, just like player 1 has).
Before, with Happ Universals:

After, wtih U360s:

mexeco · « **Reply #314 on:** March 17, 2008, 06:10:31 pm »

Well done guys some awesome cabs on display here-feel a bit ashamed to show mine built up from a couple of old pc cabs we had lying around-my first attempt but will be doing mk2 soon-with some inspiration from you guys cheers.

Ummon · « **Reply #315 on:** March 17, 2008, 10:40:50 pm »

A little rough, and the stickers are garish, but a nice idea nonetheless. Fairly comfortable-looking sit-down. If you had brought forward the bezel panel, you could've put in a bigger, more angled monitor.

mexeco · « **Reply #316 on:** March 18, 2008, 08:26:51 am »

Thanks for the reply-yes it is a little rough lol-believe me i'm no carpenter but my housemate was pushing me to finish it hence the rushed look.

Like i said most of the bits we already had-including the 19" lcd monitor-so it is definately a 'budget build'-and i've learnt a lot so far on this one which i can utilise on mk2 which will hopefully have a larger screen and proper cp with overlay etc. i was planning on getting some perspex etc. for the cp but was worried about cutting the holes?

Also the reason the monitors where it is is because i made the cp to be able to pivot up so it would fit through doors etc. but doesnt quite alas-oh well.

Ummon · « **Reply #317 on:** March 19, 2008, 09:21:04 pm »

Quote from: mexeco on March 18, 2008, 08:26:51 am

Thanks for the reply-yes it is a little rough lol-believe me i'm no carpenter but my housemate was pushing me to finish it hence the rushed look.

Like i said most of the bits we already had-including the 19" lcd monitor-so it is definately a 'budget build'-and i've learnt a lot so far on this one which i can utilise on mk2 which will hopefully have a larger screen and proper cp with overlay etc. i was planning on getting some perspex etc. for the cp but was worried about cutting the holes?

Also the reason the monitors where it is is because i made the cp to be able to pivot up so it would fit through doors etc. but doesnt quite alas-oh well.

Oh. A fold-up panel. I'd wondered about the inside of the 'hood'. Well, I don't know how often anyone else would move such a thing, but if it were me I'd just make it detachable for the rare case needing it.

rlehm · « **Reply #318 on:** March 20, 2008, 03:59:56 pm »

It's a SlikStik, nothing I made. All I did was take all the buttons etc off and add the overlay to it.

emb · « **Reply #319 on:** March 20, 2008, 04:04:25 pm »

Quote from: rlehm on March 20, 2008, 03:59:56 pm

It's a SlikStik, nothing I made. All I did was take all the buttons etc off and add the overlay to it.

That is a sweet cp overlay!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news