Main > Main Forum
Control Panel Database: Post a picture of your Control Panel!
javeryh:
Here's my recent one.
I'm using an Ultimarc 360 with a pink balltop, black Happs buttons and pink buttons from Dream Arcades for parts. The construction is MDF with Happs black pica vinyl overlay.
kelroy:
my cp custom designed and build, it was my first one so it is not as good as some of the other ones posted. it has a ipac ps/2 and all the admin buttons are hidden inside the coin door.
releasedtruth:
It's been done a long while, just looks saucier in the dark. Chrome rings on the 1/2up buttons and stainless steel dustwashers to go with the stainless sticks. Other admin buttons are on the back side of the panel along with 2 usb connectors.
GT
Herk:
Releasedtruth,
Your whole cab is awesome, the cp is so shiny. Did you get your inspiration from a Vindicators cab? My machine is an original Vindicators and I like the different style of cabinet. Great job, period
Herk
alandrogers:
There are some messages here by me in the main forum when I was trying to work this all out from the original design and such, but finally got it all mounted. (not wired up yet, but mounted)
Also ... since I noticed I'm on the front page news I thought it appropriate to update the picture of the CP.
Here it is ... all mounted .. except for the spinner, cause I only got the knob :( ... still waiting on the spinner and miniPac to move this part along.
the t-molding should arrive sometime next week
the top is covered with 1/8" abs plastic. it was really nice to work with. I used that because there were a lot of screw-ups in the plywood, and I wanted something opaque to cover it all up. when I went down to Tap Plastics, the only lexan they had was clear or smoky-clear. I could upgrade at some point in the future if I do some graphics, but the way I am ... it'll probably stay like it is til I build another one. If I ever do want to change it, it's just held in place with those 4 outside corner screws.
The 4-way is sandwiched between the plywood and the abs top. It's the original wico from the cabinet I bought, along with the original carriage bolts, too.
I actually love the look of the abs .. it's got a grainy texture that almost matches the trackball mount.
It's a bit of a change from the very first design posted here: http://forum.arcadecontrols.com/index.php?topic=64245.msg641923#msg641923
And slightly modified from my "final": http://forum.arcadecontrols.com/index.php?topic=64439.0
The only thing i really do want to change is the machine screws holding the main joysticks. I havent been able to find those #10 carriage bolts anywhere locally yet.