Main > Main Forum

Coin Door Screws! What color?

Pages: << < (4/5) > >>

DEMENTED:

Carriage bolts from a hardware store will have markings stamped on the head.  If you want the smooth headed bolts used on original arcade cabinets order from an arcade specialist.  The vendor Divemaster  was mentioned earlier in this thread and I  recommend The Real Bob Roberts. A link to Bob's webpage is available from the links page off of the main BYOAC page.  For the proper size measure the distance  between two opposite sides not corner to corner.  I Have the Happ over under mini door (part # 40-0513-00)  and it appears to be 3/16 so according to http://www.boltdepot.com/fastener-information/Machine-Screw-Diameter.aspx I would need a #10 carriage bolt of the appropriate length.  BTW  For the price we pay Happ for these new coindoors they should include mounting bolts.

NightGod:

For the prices Happ charges, they should send a stripper to your house to install them.

rdowdy95:

Doh!  The .25 inch ones were a tad too big.  I will try the 3/16 ones.  I will go to my local Ace Hardware.  They may have the smaller ones.  If not Divemaster will be getting an email.

Yeah you would figure they would include the stinking carriage bolts.  Man these projects cost cash!!!  A whole lot of cash!

shardian:

fyi, bob roberts does not do paypal.

rdowdy95:

what is this guys website.  I tried typing in bobroberts.com realbobroberts.com

What is his website? Can you order anything from it?

Pages: << < (4/5) > >>

Go to full version