Main > Software Forum
[AtomicFe] New layout on line!
<< < (2/4) > >>
gamenut:
Thats what i was doing!
But ok- I'll try the plug and play
youki:
You can use the multiconf_wizard and Plug'n play module , if you need to add your own configuration to the plug'n play one. (For instance, if you want add an emulator that didn't exist in plug'n play module).

To do that , you have :

-First disable all plug'n play module, with the plugnplaymanager.exe  .
-Use the multiconf_wizard to make your configuration and Atomic to test it.  (you won't see plugnplay module when you will start Atomic, only the configuration you are building)
-Once you configuration is ok and works ,  run plugnplaymanager.exe again.
-Re-enable all your module , and click on "ADD existing config" button. Then select the "Main.cfg" config of the multiconf generated by the multiconf_wizard.
-Then run Atomic, you will see all your module and your configuration.

gamenut:
Youki,
I have got it load with games. But the screen is sideways. And do i have to config the keys? The only keys working are 1 and enter and up down. 1 and enter turn the screen normal for about five seconds then it switches back to sideways.
Havok:

--- Quote from: gamenut on October 13, 2006, 05:03:05 pm ---Youki,
I have got it load with games. But the screen is sideways. And do i have to config the keys? The only keys working are 1 and enter and up down. 1 and enter turn the screen normal for about five seconds then it switches back to sideways.

--- End quote ---

Run AtomicManager, and on the General tab, verify the screen orientation is set to vertical. There are two settings, so try one, and if that does not display correctly, try the other. Make sure that you have your .cfg file loaded (if you changed it from the default).

You should not need to define any keys, but here is the default keyset:

Arrow Up/Down - > Navigation in the list
Arrow Left/Right - > Navigation in the list page up/down (or alphabetical, depending on your config)
"1" or "&" or "Enter" (NOT on the numeric keypad) - > Play the selected game
"Q" -> Display History.dat entry for selected game

If the UserList (Favorites) is activated:
CTRL: Add the selected game to the list
ALT: Remove the selected game from the list
SPACE: Switch between the standard list and user list

If there is a configuration change with on the fly changes activated:
"A": Open/Close the list of available configurations
"1" or "&": Load the selected configuration

In multiconfiguration mode:
"1" or "&" or "Enter" - > Access the selected menu item
"2" or "E" or "BackSpace" - > Return to the preceeding menu

gamenut:
Thanks Havok,
But no change :hissy:
When i hold down "1" when trying to select a game, the screen flips to normal and will stay there untill i release it. I noticed at the top of the screen that it displays my atomic fe file path. And on top of my games list it has some kind of ERROR message. I can tell something is infront of it but don't know what it is becuase the screen is off center.
Sorry, i'm such a newb
Navigation
Message Index
Next page
Previous page

Go to full version