Hi Guys,
Craig, just wanted to start by saying thank you for taking the time to set up your iso file.
I burned a copy to disc and installed first on a P1 233MMx. Install went fine and was able to run the free rom games. Setup 0.55.
Tonight, I used the exact same disc on a P3 733. Once installed, I get the Mame splash screen and then nothing.
If I add "pause" to glaunch.bat, I am prompted to hit return before GameLauncher will run. After hitting return, GL fails to launch and I get the following error:
Load Error: No DPMI - Get csdpmi*b.zip
In the C: directory, there is a file entry for CWSDPMI.SWP, but its size is 0.
Tried launching both GL and Mame from the c: prompt and get the same load error as above.
Scan from the c: prompt gives the same result then on the next line says cannot run _gl.exe.
Same error was present after loading .36, .55 and .100.
Anyone else seeing this?
Anyone making any progress on getting PCI sound cards to work in DOS? I have several P3's available to me, but none with ISA slots.
IG-88,
What Ensoniq's did you try? Reason I'm asking is
http://easymamecab.mameworld.net/html/hardware.htm claims the Ensoinq should be the cure all. I happen to be trying the 1373 in this particular P3 733 above. Although the above problems persist with or without the card installed or configured.
RXII,
Can you elaborate a little further on your set up? You said you have no issues after installing win98, even sound straight away. Are you running DOS off boot or in a shell?
Last question for this post: If I have to end up using a winMame on these P3's, do you recommend command line or Mame32? Why?
Thanks in advance,