| Main > Main Forum |
| Opening Turtles Cabinet |
| << < (6/7) > >> |
| TMNTfan:
--- Quote from: RayB on October 14, 2006, 04:04:45 pm ---Download the manual already... --- End quote --- I have the manual, but it's no help, the only thing explained is the coindoor assembley. --- Quote from: jfh2112 on October 15, 2006, 01:58:23 am ---Looking at photo #6, it looks like you should be able to unlatch the control panel, then go in from the front where the CP was & unbolt the coin... um... thing. :) Two hex bolts on each side, and it should slide out the front. --- End quote --- As I already stated, I can't reach the latches, the picture lies in showing distance. Only with a stick and even then it's hard and it scratches everything. But I had the CP open before and taken out. The "coin thing" is bolted with assorted screws AND inbus and I also can't reach them to unscrew them. (they are on the wrong side of the glass (inside) Furthermore there are a lot of wires for the credit switches on the black bar that supports the glass and I fear for breaking them. So in the end.. I could get in that way, but with danger of breaking things. I'd do it if I really had to repair some things, now it's just an unclean screen and the bezel that's crooked, but I don't think that is the "system" or "trick" to it.. By the way, anyone that's seen the pictures got any ideas for the battery or the (extra?) pcb coin board? TMNTfan. http://www.uhbt.nl/turtles |
| johnm160:
what can you see from the inside where the glass meets the speakerboard? |
| SirPeale:
So when are those pictures coming? |
| RayB:
--- Quote from: Peale on October 14, 2006, 05:06:27 pm --- --- Quote from: RayB on October 14, 2006, 04:04:45 pm ---Download the manual already... --- End quote --- It may or may not have disassembly proceedure for the cabinet. --- End quote --- Yeah but what about the dipstich settings that he says he is just randomly messing with? |
| SirPeale:
--- Quote from: RayB on October 15, 2006, 11:34:48 am --- --- Quote from: Peale on October 14, 2006, 05:06:27 pm --- --- Quote from: RayB on October 14, 2006, 04:04:45 pm ---Download the manual already... --- End quote --- It may or may not have disassembly proceedure for the cabinet. --- End quote --- Yeah but what about the dipstich settings that he says he is just randomly messing with? --- End quote --- Ah, I didn't read that part of the thread. Without the context your message was kinda 'huh?' Now it makes sense. |
| Navigation |
| Message Index |
| Next page |
| Previous page |