Main > Main Forum

Mini Ipac question

Pages: (1/2) > >>

sealslayer:

I have ordered my Buttons, Joysticks and trackball from dreamarcades and as we speak they should be crossing the pond over to me in the UK  :applaud:

My question is will a mini Ipac have enough inputs for my needs?
I will have two joysticks, with 6 buttons each, player 1 and 2 buttons, coin1 and 2, escape and maybe a tab button.
The trackball is PS/2 so theres no issue there I presume as that goes into my mouse slot.
cheers


delta88:

the minipac is ok but the wiring harness that comes with it is meh.. yep, meh. I have used it 4 times and the connectors dont reallly fir the microswitches. best to make your own harness.

sfrascella:

I have a similar setup on my CP and the Minipac does the job quite well. In my opinion the wiring harness is a must as it will save you lot's of time stripping and crimping. Also consider getting the extension pack if you have your controls more than 18" apart.

Texasmame:

The review is here, with my comments/experiences at the bottom of the thread.

http://forum.arcadecontrols.com/index.php?topic=56820.0

londonbabe:

Yes, it will be fine for those inputs, and does an excellent job. Well worth the money.

I had to squish the crimp connectors a bit to get them to fit snugly, but hell, I had to do that on all the rest of my wiring too.

Pages: (1/2) > >>

Go to full version