| Main > Main Forum |
| Mini Ipac question |
| (1/2) > >> |
| sealslayer:
I have ordered my Buttons, Joysticks and trackball from dreamarcades and as we speak they should be crossing the pond over to me in the UK :applaud: My question is will a mini Ipac have enough inputs for my needs? I will have two joysticks, with 6 buttons each, player 1 and 2 buttons, coin1 and 2, escape and maybe a tab button. The trackball is PS/2 so theres no issue there I presume as that goes into my mouse slot. cheers |
| delta88:
the minipac is ok but the wiring harness that comes with it is meh.. yep, meh. I have used it 4 times and the connectors dont reallly fir the microswitches. best to make your own harness. |
| sfrascella:
I have a similar setup on my CP and the Minipac does the job quite well. In my opinion the wiring harness is a must as it will save you lot's of time stripping and crimping. Also consider getting the extension pack if you have your controls more than 18" apart. |
| Texasmame:
The review is here, with my comments/experiences at the bottom of the thread. http://forum.arcadecontrols.com/index.php?topic=56820.0 |
| londonbabe:
Yes, it will be fine for those inputs, and does an excellent job. Well worth the money. I had to squish the crimp connectors a bit to get them to fit snugly, but hell, I had to do that on all the rest of my wiring too. |
| Navigation |
| Message Index |
| Next page |