| Main > Main Forum |
| Marquee retainer |
| (1/2) > >> |
| SithMaster:
i just got my happs retainers and im fairly certain i should tape off the area im going to be drilling to prevent cracking. what kind of tape should i use. masking right. |
| SteveJ34:
You can tape off using masking but I dont expectyou will have any problem with the few holes you need to mount. Its plastic not plexi or lexan.... ...best of luck. Steve |
| SithMaster:
ah then it is just me being worried. what about using a small bit then a larger bit? just worried it will crack. if anything ill drill the center hole for the top to see how well it goes. thanks. |
| NightGod:
Put a piece of wood behind it to help steady it and drill away. Plastic drills very well-better than wood, IMHO. |
| Czapala:
I would not worry. When I got my Happ retainers I used a tablesaw to cut it to the right length. Heck I even used the table saw to trim off the extra from the bezel I got from Happ. :dizzy: So I don't think a drill will crack it. |
| Navigation |
| Message Index |
| Next page |