Main > Reviews

Does anyone own Ultimarc 360, and Happ Perfect 360, that could give a review?

<< < (2/5) > >>

destructor:
4-way restrictor on diagonals (diamond) has identical size as circle restrictor diameter.
(1) You can set it by ultimarcmap application. Excellent solution. It can be set to immediately reaction.
(2) I will check it today.

(+_+):
Can't wait to hear back from you destructor. I'm very close to picking up 4 of them.

Thanks

destructor:
I can add some more infos. (I still use circle restrictor).

Food Fight - analog mode works excellent, I'm ready for world record now.

Kowal say that for fighting games U360 is weak. But maybe he must more play on this stick. I will test this stick on fighters too. On MARP is K5 tournament now. I will play all games on U360, fighter should be too.

I played a bit on DoDonpachi, excellent work but a bit harder spring could be better than default. Additional springs available in Ultimarc shop are too hard.

Changing modes from 2/4/8/analog to other is very easy, 3 clicks in UltimarcMap application. (first one click - show list of modes, second click on mode, third click to program joystick).

You must know that you don't feel stick in hand, default spring is very light.

I will write here notes for this stick in some games (max note is 10). I will add more in future.
Over Top (driving, 2-way) - 10
Food Fight (maze, analog) - 10
Tiger Heli (old airshooter, 8-way) - 10
Star Force (old airshooter, 8-way) - 10
Maniac Square (drop-down puzzle, 4-way) - 10
DoDonpachi, DonPachi (shmups, 8-way) - at this time I give 8 for default spring but maybe I played too long on hard P360 spring. This note can be changed. -> I played a bit more. Note will be not change. I installed additional harder spring, it's totally bad, additional springs are useless. I must find new better spring. EDIT: after install new Ultimarc spring note is 10 for shmups ;)


EDIT2
(2) angle counted precisely with center in rotation center is 9 degrees (with circle restrictor plate). This result is most precisely.

RobotronNut:

--- Quote from: destructor on September 08, 2006, 11:40:32 am ---(2) angle counted precisely with center in rotation center is 9 degrees (with circle restrictor plate). This result is most precisely.

--- End quote ---

thanks for the info!

does the stick also hit restriction at 9 degrees with the 4-way restrictor?

destructor:
Square restrictor on diagonals has the same size as diameter of circle restrictor.
Then using square restrictor if you hit diagonal max throw will be 9 degrees, if you hit normal direction max throw will be lower than 9 degress (8=8,5, I didn't check it).

Restrictors have inner and outer size (up and down). Sizes of Sanwa restrictors:
circle:
- inner diameter 21mm
- outer diameter 23mm
square on normal direction:
- inner size 19mm
- outer size 20.5mm
square on diagonals:
- inner size 21mm
- outer size 23mm

Two last days I change restrictors, remove them and etc. I notice that diameter (on wide side) of black pillars in restrictor plate kit is too small or Andy think about mounting restrictors reversed.
And default brackets are too short I think (I used additional pads).

Will be good if Andy made detailed picture how assemble/dissasemble U360 with and without restrictors.

Navigation

[0] Message Index

[#] Next page

[*] Previous page