Hey folks,
I mentioned in another thread I got the Apache Blackhawk Push/Pull spinner and I finally took some pictures of my cheesy test-bench I built for it (see pics below) to try it out. This is a long and wordy review but I am trying to point out things that I haven't seen anyone else mention yet about this great spinner.
A little background. One of the reasons I got into MAME is Tempest. (That and Galaga.) Since Tempest is an all-time favorite I always knew I had to have a spinner. So an Oscar V2 was one of the first controls I ever bought (along with a Galaga/MsPacMan reunion stick for Galaga). I got the V2 with a push kit because my #3 favorite game is Discs of Tron. I figured, I could at least have HALF a push/pull, then maybe use a button on the flight stick to substitute for the "pull" function. At the time Oscar's DOT spinner was not available. Needless to say playing DOT with a push-only spinner and halfassing the pull function with a button didn't work at all, so I simply never played DOT. And forget the wild prices original DOT spinners (and even Oscar copies) were costing on Ebay! And anyone who thinks you can play DOT without a push/pull, forget it. Even if you've worked out some system with buttons on your CP that seems to work, it's not the same. Thank goodness Apache came along with the Blackhawk. Once you play with a real push/pull, your scores will soar and you will know THIS is how the game is supposed to be played!
Okay on to the Blackhawk. First of all, the name Blackhawk is cool but even cooler is how the spinner chassis itself is anodized black! The chassis is designed as a single piece, a square cube with two open sides. The company logo is etched in the metal, cutting through the black and showing the silver metal. Very slick. The "wow" factor of this unit is really impressive. Of course, all this is invisible under your control panel, but let's face it, we got into this hobby because we're do-it-yourselfers and take pride in well-made stuff. Why else would so many people share pics of the undersides of their CP to show off tidy wiring? This is definitely a great looking piece of hardware.
More about the construction of the Blackhawk. It's totally bulletproof, every part is metal, the bushings are brass, the flywheel is machined, even the pre-wired USB cable (if you get the "Primary" configuration which I did) is a better-than-average piece, pre-connected and held securely by a little metal clamp thingy that makes it impossible to accidentally pull the wires out of the connectors on the PCB. Speaking of the PCB, it looks like it was designed along with the chassis itself, because it fits perfectly on one side of the chassis, and even the circuitry is laid out efficiently. I've seen some ugly PCBs that are larger than they need to be. Not so with the Apache. As for the general design of this thing, all I can say is these guys are clever. As a DOT lover I thought of trying to either convert my V2 or make a spinner from scratch to do the push/pull but I couldn't ever think of how to do it without simply copying the leafswitch mechanism in the original DOT part (or Oscar's copy). And whatever I could build would never be as slick as this. The Blackhawk is totally reliable and the use of microswitches means no tweaking or adjustment needed. The chassis does allow up and down adjustment of the microswitches to fine-tune the range of push/pull motion needed to activate the switches. But this is fine-tuning for individual feel preferences, not adjustment for the purpose of keeping it functional. This design seems pretty much maintenance-free. The way the design uses a flywheel with two flat circle pieces -- one with teeth for the optical thingy to read and the other without teeth to activate the switches -- is one of those slap-your-head and say, "Why didn't I think of that?" things.
It's a really smart design and it works great.
I notice in some of the stuff written about this spinner it is mentioned that there is a "grinding" noise when pushing/pulling and spinning simultaneously. Well, yeah, the design is such that if you activate a switch and then twist the knob, it'll scrape. But when the heck would you ever do this? Until I read this online it never even occured to me this would be a problem. By then I'd played a couple hours of DOT (I can make it to the push/pull levels pretty much every time now yayyyyy) and never once did I encounter any ugly noises. For one thing, unless I use both hands I can't even pull or push and turn the knob at the same time. So don't be concerned about this... I don't think it's an issue at all.
Another thing people talk about is this "resolution" thing. I don't fully understand all the technical mumbo jumbo on that subject, but I do know this: both this spinner and the Oscar V2, which have different tooth counts on the encoder wheels (the Oscar actually has fewer teeth than the Apache), both worked totally fine in all games. The Apache is especially good at Tempest. This spinner has just the right feel for this game. Kevin noted this in his Retroblast review too so it's not just me. This spinner required virtually no adjustment in MAME (but if it does, hit TAB in-game and adjust the sensitivity as needed, no biggie), and it moves the cursor/ship/whatever with even the slightest touch. The most adjustment I needed was for Arkanoid, all I had to do was bring the sensitivity down a ways and it plays pretty good now. I know some people are really hardcore about Arkanoid, but let's face it if that's your #1 game you should get an original Arkanoid spinner with the geared mechanism. No free-spinning spinner like the Apache or V2 or Tornado or whatever is going to give you that geared feel. But for me, with adjustment the Apache works just fine on that game too.
Okay this review is way too long already so let me wrap it up. The main feature of this spinner is the push/pull capability which is expertly executed and works great. But that is not the only thing the Blackhawk offers. It is a well built, tough, and very cool looking spinner and with the Primary USB configuration it takes the place of my OptiPac as well! (You can hang a trackball off of this thing.) So the price of the Blackhawk is totally worth it. Oh yeah and the knob is AWESOME. It has grippy knurling grooves but it doesn't feel like a pumice stone.
Oh and as for the customer service and all that stuff, David at Apache was great answering questions and the thing came packed perfectly and even included a cool little hex screwdriver for installing the knob. Yeah, I know, who would buy an arcade part for a home project and doesn't already own a set of hex keys, but this was a very nice touch. And my hex keys are the basic L-shaped things not a nice "real" tool like this so it's actually a useful little free gift.
Some links...
http://www.apachecontrols.com/http://www.retroblast.com/reviews/apache-070106-01.htmlOkay that's enough typing... below are some pics of my lame spinner test bench... notice I am getting my DOT game on!
Eric.