Main > Reviews

Ultimarc 360 Joysticks - my review

<< < (13/14) > >>

Anubis_au:
So basically you need Windows (or Linux etc)... not DOS. Are there DOS USB drivers? Trying to keep a hold of DOS/advmenu/advmame if I can... it seems the arcade world went Windows on me in the last few years...

destructor:
I know that U360 works under Windows OS. I don't know nothing about Linux/DOS, I didn't saw Linux or DOS utilities on Ultimarc page.

bleargh:
I'd asked Andy about Linux support for the U360, and he pointed me towards the following post:

http://forum.arcadecontrols.com/index.php?topic=63729.msg635932

I haven't tried it (don't have my U360s yet), but the protocol looked simple enough that even if this version didn't work I could pretty easily hack together a new U360 Linux driver...

BTW.... if anyone else out here has stuff they want running under Linux, I'd be happy to build drivers for the hardware; I just need h/w to test with and pointers on the protocols.  Consider it "driver development, at the cost of one unit of h/w".  ;D

(+_+):
I just installed these sticks and the magnetic disk lightly touches the rounded black chip that's attached to the circuit board. I installed the round restrictor plate and was wondering if it is meant to be this way or have I reassembled it incorrectly.  :dunno

Thanks.

rockin_rick:
Looking at mine, there is about 0.125-0.150" clearance between the magnet and the blob.

Rick

Navigation

[0] Message Index

[#] Next page

[*] Previous page