| Main > Main Forum |
| GGG Trackbal Booster Kit Sizes |
| (1/1) |
| Level42:
Can anybody who has the GGG Trackball Booster Kit tell me what the diameter of the wheel is and what the diameter of the shaft is ? For anyone interested: I'd like to see if it's possible to use it on a 2.25" Suzo Trackball. The diameters I measured are 1.5" for the wheel and 1/4" for the shaft. |
| Level42:
Nobody ?? Randy ?? |
| RandyT:
The diameter is about 1.46". The center hole of the encoder wheel is clearanced for a #4-40 machine screw. It is designed to bolt onto a stock encoder shaft. RandyT |
| Level42:
--- Quote from: RandyT on August 17, 2006, 11:55:58 pm --- The diameter is about 1.46". The center hole of the encoder wheel is clearanced for a #4-40 machine screw. It is designed to bolt onto a stock encoder shaft. RandyT --- End quote --- OK, so that's different from the Suzo then, that wheel simply shifts over the shaft and that's it. So there's a small "tube" on the wheel to make this possible, I bet your wheels are totaly flat right ? Don't think they will be useable on a Suzo then, at least not without some work... |
| Navigation |
| Message Index |