Main > Main Forum
Power Supply from Happs 80-0015-00 manual
Pages: (1/1)
jimmy_bored:
Where's the manual for this power supply. I am trying to figure out what this blue wire is for sure... I am assuming its -12 volts, but I want to be sure...
Thanks,
JImmy
SirPeale:
Why don't you just meter it?
jimmy_bored:
--- Quote from: Peale on August 03, 2006, 09:41:19 pm ---Why don't you just meter it?
--- End quote ---
I could... But i would also like the manual... For all componets in my cabinets I document everything and create a nice file...
Ken Layton:
These are all A.M.O.A. standardized power supplies. The 9 pin connector is the DC output voltage. Here is the A.M.O.A. standard pinout:
Pins 1,2, and 3 are +5 volts (generally red wires)
Pins 4,5, and 6 are ground (generally black wires)
Pin 7 is the - 5 volts
Pin 8 is the +12 volts
Pin 9 is not used and is normally empty
jimmy_bored:
--- Quote from: Ken Layton on August 04, 2006, 12:02:04 am ---These are all A.M.O.A. standardized power supplies. The 9 pin connector is the DC output voltage. Here is the A.M.O.A. standard pinout:
Pins 1,2, and 3 are +5 volts (generally red wires)
Pins 4,5, and 6 are ground (generally black wires)
Pin 7 is the - 5 volts
Pin 8 is the +12 volts
Pin 9 is not used and is normally empty
--- End quote ---
Thanks for the info.... This supply only has a 6 pin connector for the dc... So who ever had this before me must of hacked it.
Pages: (1/1)