| Main > Main Forum |
| Power Supply from Happs 80-0015-00 manual |
| (1/1) |
| jimmy_bored:
Where's the manual for this power supply. I am trying to figure out what this blue wire is for sure... I am assuming its -12 volts, but I want to be sure... Thanks, JImmy |
| SirPeale:
Why don't you just meter it? |
| jimmy_bored:
--- Quote from: Peale on August 03, 2006, 09:41:19 pm ---Why don't you just meter it? --- End quote --- I could... But i would also like the manual... For all componets in my cabinets I document everything and create a nice file... |
| Ken Layton:
These are all A.M.O.A. standardized power supplies. The 9 pin connector is the DC output voltage. Here is the A.M.O.A. standard pinout: Pins 1,2, and 3 are +5 volts (generally red wires) Pins 4,5, and 6 are ground (generally black wires) Pin 7 is the - 5 volts Pin 8 is the +12 volts Pin 9 is not used and is normally empty |
| jimmy_bored:
--- Quote from: Ken Layton on August 04, 2006, 12:02:04 am ---These are all A.M.O.A. standardized power supplies. The 9 pin connector is the DC output voltage. Here is the A.M.O.A. standard pinout: Pins 1,2, and 3 are +5 volts (generally red wires) Pins 4,5, and 6 are ground (generally black wires) Pin 7 is the - 5 volts Pin 8 is the +12 volts Pin 9 is not used and is normally empty --- End quote --- Thanks for the info.... This supply only has a 6 pin connector for the dc... So who ever had this before me must of hacked it. |
| Navigation |
| Message Index |