| Main > Main Forum |
| URGENT - GeForce3/Powerstrip/MAME Res tool not work w/ 25"? |
| << < (3/3) |
| Silver:
Hi, Based on your verbose output, mame is choosing the 640x480 resolution itself. Or in the case of the mamepp mslug4 -verbose, it is choosing 800x600. Can you print the output when you try: mamepp mslug4 -verbose -r 320x240 Note, for mame to use ANY resolutions lower than 640x480, they need to be available to WINDOWS. Powerstrip is capable of doing this - you need to create custom resolutions, save them, powerstrip will add them to windows (and tell you that you need to reboot). Note that for powerstrip to do this, I believe the gfx card must support custom resolutions. But I think it tells you this.. There is some info on creating custom resolutions here: http://forums.entechtaiwan.net/viewtopic.php?t=24 The reason your games look ok is because mame is scaling all of them to 640x480 (this is what hwstretch is doing). Also note that the Jpac will divide 31Khz signals to 15Khz - and yours is the 2nd post I've read today with someone with a jpac only seeing 1/2 the screen. Not sure if this is what the jpac does with 31Khz signals (what do you see during boot up time?) or what you are sending.... |
| MartyNg:
I just went ahead and ordered an ArcadeVGA v2. I'll see how that works before I mess around with powerstrip anymore! :) I'll post my results once that's installed! |
| Navigation |
| Message Index |
| Previous page |