Main > Main Forum
CP Layout Critique
<< < (2/3) > >>
BlinKY1337:

--- Quote from: shardian on July 27, 2006, 08:38:44 am ---Is there a reason your p1 and p2 controls are not level with each other?

--- End quote ---

He probably noticed that I'm sure not on purpose Do yourself a favor and make your life easy go to a print shop get a full size template printed out like 10 bucks maybe at the most so you don't have to cut and tape and line sheets of paper up. lay it down then make lil pilot holes into the wood where the buttons go. don't try to drill all the way through the paper will get all smashed to ---steaming pile of meadow muffin---. Remove the paper drill the rest of the hole perfect everytime.  ;D
Banacek:

--- Quote from: shardian on July 27, 2006, 08:38:44 am ---Is there a reason your p1 and p2 controls are not level with each other?

--- End quote ---

Wow, thanks for pointing that out! I measured from the wrong line! That would of been bad...
shardian:
I also noticed you didn't have any center lines for the button holes. May want to add them before you drill.
gamecreature:
What button(s) are you using for esc?
Banacek:

--- Quote from: shardian on July 27, 2006, 01:41:04 pm ---I also noticed you didn't have any center lines for the button holes. May want to add them before you drill.

--- End quote ---

Yeah, is there a template that has those? I like the 7 button spacing template on the Project Arcade CD, but it doesn't have center lines.
Navigation
Message Index
Next page
Previous page

Go to full version