Main > Main Forum
Bally Midway Coin Door
Pages: (1/1)
jimmy_bored:
I have two quick questions reguarding the Bally Midway coin door from a Tron cabinet.
1) The coin door takes 12V right? (Like for the lights)
2) The mechs are missing. Is it possible to get the mechs for this coin door?
I have attached two pics for reference.
Thanks,
Jimmy
Ken Layton:
If the door came from a Tron, then the lights in it are 12 volt (#194 lamps available at any auto parts store).
Most conventional coin mechs will fit this door, but not any Coin Controls brand.
These doors were originally equipped with Coin Mech brand coin chutes.
jimmy_bored:
--- Quote from: Ken Layton on July 26, 2006, 05:53:20 pm ---If the door came from a Tron, then the lights in it are 12 volt (#194 lamps available at any auto parts store).
Most conventional coin mechs will fit this door, but not any Coin Controls brand.
These doors were originally equipped with Coin Mech brand coin chutes.
--- End quote ---
Thanks Ken!
Pages: (1/1)