Author Topic: Modern take on a Retro Cabinet Design - MAMEY WINNER (Read 22057 times)

Potts · « **on:** July 19, 2006, 07:55:27 pm »

Hey All,

This is the first post on BYOAC for me and it come in the form of an annoucement - I finished my cabinet and I would like to share it with the world.

This is the second cabinet I have built - and I decided to go a little all out, I built a modern take on a retro design. Let me know what you all think.

Also there is an article writen for a Magazine called Hyper - which is sold throughtout Austraila. Most of you won't be able to get this on the magazine stands so here is the link to download a PDF article.

http://monkeyobarrels.com/images/arcade_cabinet.pdf

I am happy to answer any questions should you guys shot them through

cheers,
Potter

leapinlew · « **Reply #1 on:** July 19, 2006, 11:10:41 pm »

Wow!

Thats some table top. Well done!

theCoder · « **Reply #2 on:** July 20, 2006, 12:04:07 am »

Very clean. My wife might allow a cab in my living room if it looked like that. Good job.

MikeDeuce · « **Reply #3 on:** July 20, 2006, 01:11:58 am »

Awesome engineering/execution!

Effayy · « **Reply #4 on:** July 20, 2006, 01:18:06 am »

Oh wow, that is SEXY!

Nice job!

- FA

vrf · « **Reply #5 on:** July 20, 2006, 01:26:24 am »

You seriously can't come in here with a cab like that and POST ONLY ONE FREAKING PICTURE! Come on, man, get with the program.

Anyhow, awesome, awesome work. I love the design and glossy finish.

Potts · « **Reply #6 on:** July 20, 2006, 03:10:06 am »

Hey All,

Thanks for the feedback !!

I need to check - were you all able to read the PDF ?

My cocktail cabinet will eventually hold all the major consoles / a Mac / and a PC.

Here are some other photos -

I will post some more building images later

Potts · « **Reply #7 on:** July 20, 2006, 03:14:33 am »

Potts · « **Reply #8 on:** July 20, 2006, 03:19:34 am »

My cabinet was designed in 3D before I built it (see attached render) - the skeletons (biped) you see are to scale so I was able to work out the ergonomics (knee height etc).

cheers
Potter

Paladin · « **Reply #9 on:** July 20, 2006, 08:34:33 am »

Beautifil cab! I was able to open the PDF with no problems. I couldn't tell from the pics if there's glass over the monitor. Do you always flip up the top to play, or can it be played with it down like a cocktail cab?

Four 80mm fans and two 120mm, sounds like it's pushing a lot of air! Are you running the fans at full speed, just how loud is it?

Great work!

MYX · « **Reply #10 on:** July 20, 2006, 08:45:54 am »

Now that is arcade stupidity at it's best.

I meant this as the total compliment. My wife said to me "You spent how much on spray paint?". You went and had it done for $500. Ghaw it is sexy. I am not a big fan of sit downs, but that is nice.

Would have liked to read about it during the process, but oh well. How long did it take?

javeryh · « **Reply #11 on:** July 20, 2006, 10:27:41 am »

Wow that thing is awesome! Totally original design - nice work!

yfdgricker · « **Reply #12 on:** July 20, 2006, 01:05:51 pm »

Great article and great cab! I really like the look of that.

MameMaster! · « **Reply #13 on:** July 20, 2006, 03:05:51 pm »

MAMEY MAMEY!.....WOW.

That's stellar!.....amazing job and what a shine!

arcadefever · « **Reply #14 on:** July 20, 2006, 05:13:04 pm »

that cab is just

i love that design, that is pure genius build

very nice

Stingray · « **Reply #15 on:** July 20, 2006, 10:07:47 pm »

[quote author=MameMaster

davieboynj · « **Reply #16 on:** July 26, 2006, 02:01:58 pm »

Absolutely amazing.

Crafty · « **Reply #17 on:** July 28, 2006, 12:16:10 am »

More Photos Please Especially of the build..

The cabinet's around here are looking over the top lately.

Firstly Knieval's Woody .... now This..

I can't compete...

Potts · « **Reply #18 on:** July 28, 2006, 06:54:16 pm »

Thanks Again All !!

More photos and comments to follow

Potts · « **Reply #19 on:** July 28, 2006, 07:04:22 pm »

Below are some early photos of the building process - The shape was a little tricky but I guess thats why I did it - notice I used 7mm ply to bend around the curve, then I liquid nailed 3mm mdf over the top to leave a smooth surface to spray onto.
As what I said in the article - there were heaps of issues, most of which were solved charging on ahead with total ignorance (oops I mean confidence),

Oh yeah - I tried using lighter material - like chip board on the inside but it still weighs a ton. I really have to learn how to build light cabinets.

I think I am more addicted to building then actually playing - I already have started building a Mini Upright for my son (I will post a new thread so I can get ideas from you all)

I am off to trawl through the old threads to see what you guys have done - so much to learn and so many ideas to steal

cheers
Potter

javeryh · « **Reply #20 on:** July 31, 2006, 11:59:38 am »

Awesome build photos. I love looking at these almost as much as the final project. I know what you mean about enjoying the build more than the actual finished product. I'm really close to finishing my first cab (a cocktail too) and I can't wait to get going on the next one. You have inspired me to think outside the box for whatever I decide to build next...

SNAAKE · « **Reply #21 on:** August 11, 2006, 11:28:16 am »

AWSOMENESS !

how did you paint it all shinny like that ? ?

mikevangels · « **Reply #22 on:** August 11, 2006, 03:24:45 pm »

*Off Topic*

I just read the pdf and one thing blew my mind... your arcades only cost 20 cents? Just think, 5 plays for a dollar instead of the 4 we got in the states.... drool.

*On Topic*

Nice cab. Very innovative.

Potts · « **Reply #23 on:** August 11, 2006, 06:32:43 pm »

Quote

how did you paint it all shinny like that ? ?

Professional paint job - cost $500AU so around $350US. I delivered it, they patched it up and smoothed off what I thought was already smooth, and then sprayed it with 2 Pak Black Gloss. WARNING fingure prints are a nightmare !!!

Quote

your arcades only cost 20 cents

Yes when I was a little tacker - but they soon became 40 cents then 60 cents then $1 and now you have to put a morgage out on you house to complete house of the dead III
- dam inflation

TehJefe · « **Reply #24 on:** August 12, 2006, 04:03:01 am »

I didnt see it answered, but I only barely skimmed through the PDF... why a PC AND a Mac? Theres not much that either system can do that the other cant, and while I hesitate to mention it, seeing as Ive never been a big Mac fan.. (I dont even know if thats a joke or not) I hear with the latest OS they can emulate Windows without even losing processing power.

Potts · « **Reply #25 on:** August 12, 2006, 06:54:53 am »

Quote

I hear with the latest OS they can emulate Windows without even losing processing power.

I want to use the Mac Mini - you can get a program called 'Boot Camp' for any Mac nowdays which doesn't emulate at all, but can actually boot Windows XP. I figure if I was going to make machine with all consoles in it why not chuck in a Mac that can boot as Windows aswell. Also have a Mac means very secure internet access - perfect for internet surfing and just being a download server.

I don't know - why not - does everything we do have to make sense

cheers
Potter

danny_galaga · « **Reply #26 on:** August 12, 2006, 08:25:56 am »

Quote from: mikevangels on August 11, 2006, 03:24:45 pm

*Off Topic*

I just read the pdf and one thing blew my mind... your arcades only cost 20 cents? Just think, 5 plays for a dollar instead of the 4 we got in the states.... drool.

*On Topic*

Nice cab. Very innovative.

just a note. in the early eighties the aussie dollar was worth more than the US dollar. so we didnt really have it THAT good! we can never win! damn nice cab by the way (",)

dtw_2000 · « **Reply #27 on:** August 12, 2006, 03:24:23 pm »

That's a really nice job on the cabinet

Potts · « **Reply #28 on:** August 13, 2006, 06:05:22 am »

Special thanks to the Mamey Judges - it means a great deal getting the respect from season professionals such as yourselves - awesome news -

5/5

http://www.mameworld.net/massive/NEWMAMEY/mod.htm

gamecreature · « **Reply #29 on:** August 13, 2006, 11:23:01 am »

Congrats on the Mamey. Hopefully this doesn't mean that I have to take out a loan to get my own!

danny_galaga · « **Reply #30 on:** August 16, 2006, 02:45:25 am »

yes, congratulations from the previous winner (",)

lobes · « **Reply #31 on:** August 20, 2006, 11:25:18 am »

im in australia and currently making my mame cab....i think wen i bought the hyper mag it inspired me to keep going at it.

alas im in yr12 so its hard

Potts · « **Reply #32 on:** August 20, 2006, 07:48:42 pm »

Hey Lobes (and everyone else)

Building a cabinet is no harder then anything else in this world - I have always said there are 2 types of people in the world there are - the people that do and the people that talk about doing. It's really not to hard to become a doer

Always ask questions - I and everybody else are very happy to share their opinions

hehehe Keep thrashing through, and expect to make errors. Me personally I prefer to hack quickly through the work and fix the errors as I go along - I know others that don't do anything until in been designed a million times and they never finnish the job. Never use the wrong tools - borrow them if you have to. And most of all have fun doing it - I actually enjoy the build better then the play which is why I always have a project on the go.

Hey Lobes start a Thread of your build - this will help a lot

cheers
Potter

Santoro · « **Reply #33 on:** September 06, 2006, 09:15:59 am »

Holy Crud. Truly awesome.

DrewKaree · « **Reply #34 on:** October 29, 2006, 06:04:59 pm »

Hey Potter, something I didn't recall being asked or seeing an answer if it was: What type of monitor do you have in there and how was it mounted? Any pics of the mounting of it, and how you keep it upright when in use?

Potts · « **Reply #35 on:** October 30, 2006, 05:36:11 am »

I used a 24 Inch Dell LCD - it's a perfect screen for mame

To mount the screen I used basic clothes line wire (see images)- I know it's not the prettiest of jobs but it works is very stable and it doesn't damage the screen in the slightest. But removing the screen takes about 10min.

I prop the lid up with a basic metal rod (see images)

Later DrewKaree - I am off to finish my sons MiniArcade 'Super Ruben's World'

Later
Potter

Bones · « **Reply #36 on:** October 30, 2006, 07:49:51 am »

Wow! That really is impressive.

Great work.

Potts · « **Reply #37 on:** April 07, 2007, 04:53:19 am »

I just got my PS3 - I will upload photos soon -

awesome - match made in Heaven

Loki · « **Reply #38 on:** April 07, 2007, 06:53:25 am »

That is an awesome cab! Congratulations on the MAMEY!

WunderCade · « **Reply #39 on:** April 07, 2007, 12:13:33 pm »

It looks like something the people over at Lay-Z-Boy would design. That's a compliment BTW.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news