| Main > Software Forum |
| freedo |
| << < (2/2) |
| unclet:
Yes I do ... and the spray paint seems to be spraying at a normal speed. My freedo's CONFIG menu settings are as follows: CEL Clipping and Threaded options are selected DSP LLE option is selected VDL Extrapolation option is selected Note: I did not need this setting when I was connected to a computer monitor, but when I transfered everything to my arcade cabinet (which interfaces to a TV) then I found the display did not work properly. Anyway, once I set this option then it displayed fine. I made sure to load the "fz10_rom.bin" bios file one time after installing freedo.... which I am assuming you already did, then I simply start the program by calling the following: FreeDoWrapper "C:\myGamePath\myGame.iso" PS: Keep in mind that jcrouse's freeDoWrapper was written against the "freedoWIPv1.7" build of the emulator. I would assume you are using this version. |
| vulcanfk:
Just to put an end to this thread in case someone else comes across it... it seems a 1.6GHz processor with 512MB RAM is insufficient for freedo to run games at 100% emulation speed. |
| Navigation |
| Message Index |
| Previous page |