Main > Main Forum
Going w/ swappable metal CP's -- Have a couple of questions
shardian:
I'll take some pictures tonight.
gamecreature:
I have an old Streetfighter CP where the clamp brackets are bolted onto the CP, just like the Joystick. I assume the locking portions are just screwed into the wood inside the cabinet.
Ninten-doh:
GC, it's the "bolting onto the CP" part I'm concerned about. Getting those aligned exactly the same on three metal CP's is my primary concern.
shardian:
Your cabinet does have a back door right? I can pretty much crouch all the way inside mine when it is empty, and the glass is off. You should be able to set the cp on the cabinet, and get inside the cab to line up the catches on the cp with the clamps for each panel.
This is much easier than going at it with the ruler. :)
Ninten-doh:
Take a look at the pic at the beginning of the thread that shows the CP cavity w/o the panel. Where is the ideal place to put the clamps? I'm assuming along the sides where there are currently wood blocks to rest the CP on? I guess I would have to cut those off.