| Main > Main Forum |
| attention all racers..regarding force feedback |
| << < (4/6) > >> |
| NightGod:
http://www.happcontrols.com/pushbuttons/ipb_sub_min_switch.htm They got them for $7.50 or so each, and you might be able to get them a little cheaper from one of the distributors on the forums here. |
| arcadepcnut:
these were the buttons i was referring to. http://www.happcontrols.com/pushbuttons/ilumn2.htm |
| NightGod:
Ah, so you actually need 8 buttons then? I thought you were talking about needing 4-those ones you linked would make more sense if you needed 8 of them. |
| arcadepcnut:
Well there is 8 buttons on the xbox. The gas and break pedal take up two of them. The shifter I am adding will take up two of them....so that leaves 4 buttons unaccounted for on the dash. I only need 4 square buttons. Sorry if I confused anyone. Maybe Im confused about the square buttons.... |
| arcadepcnut:
wow. I just typed up this really long message and attached pictures and the forum said pictures too big and deleted my entire message...wow. what a waste of time. to summarize. I had the wheel 1 day and voided warentee already Here are some pictures of inside of wheel: http://www.nnmodels.com/breaktime/fanatec1.jpg http://www.nnmodels.com/breaktime/fanatec2.jpg http://www.nnmodels.com/breaktime/happffbwheel.jpg I dont see why I could use the wheel off the xbox fanatec with all buttons...use the housing/pot and gear from the happ and use the motor from the fanatec. But I will play around.... |
| Navigation |
| Message Index |
| Next page |
| Previous page |