Main > Main Forum

Marquee Light Hook Up

Pages: << < (2/5) > >>

Q*Bert_OP:


--- Quote from: Ken Layton on July 01, 2006, 06:51:49 pm ---On a Ms pac the light fixture plugs into a 3 pin AMP brand Universal Mate 'n Lock connector in the game harness.

The coin door also has an Amp brand Universal Mate 'n Lock connector, but I think it's 9 or 12 pins. It also is in the game wiring harness.

--- End quote ---

THe coin door is a 9 pin

dndcollect:

thanks for the answers guys. to respond to jmbrissie, i believe i have the complete harness. thanks for taking the time to take pictures, you certainly rock sir.

jmbrissie:

here are the 2 pictures of the marque lights and a picture of where the 2nd fixtures wiring  daisy chains back down the harness then out to the right side.
facing the machine, the 2nd pic is the left side, the 3rd is the right.

good luck,
hope these help

dndcollect:

thank you very much for the pics. I am now all straight on the light, thanks for the help.

I do have a question on the coin door. It is a 12 pin, however I for the life of me cannot find the female part that the male 12 pin would go into to hook up the coin door.

is it possible its not installed?

if anyone has any pics, etc or info that would be great, thanks.

Kevin Mullins:

You should be able to backtrack the wire harness from the game pcb to find that.

Pages: << < (2/5) > >>

Go to full version