Main > Main Forum
Marquee Light Hook Up
Kevin Mullins:
I see now...... been hacked up.
Can you get a pic inside the cab from the back showing what else has been done to the wiring? And the power supply area?
What is the connector hanging right by the opening below the coin counter?
(has it been hacked into also?)
Look around for anything that looks like it's been cut, spliced, or otherwise just not right. Keep note of those as you work around the cab. You should be able to narrow some of it down just by color code matching.
dndcollect:
Yeah its not an original, someone put it together for us. I should have mentioned that.
I will take more pictures, hopefully by tonight.
thanks.
Kevin Mullins:
Yeah, It'll help us if we know what all is "Ms. Pac original" in the cab.
Is it an original cab?
We'll help ya out if we can.... sometimes it's easier when ya can put your hands on it versus imagining it. :-\
jmbrissie:
here are some more pics that might help. they are from an original pac-man machine but it should be the same as the ms. pac if its the original harness. otherwise you should be able to match the pin outs. let me know if you need more pics.
dndcollect:
thanks for the pictures, mine looks different. basicly we had someone put one together and we wanted a mspacman board. i doubt much of it is original, i dont really care about original parts as long as they work. basicly i wanted a working mspacman that i could then add stuff to, etc. as you can see the control panel overlay i think is pacman jr and i have yet to get a ms pacman bezel.
here are some pictures, first is of the cab, the picture is flipped:
http://hongkongdvdcentral.com/images/images_16632/dj%20078.jpg
next is the back of the cab, wiring, etc:
http://hongkongdvdcentral.com/images/images_16632/dj%20076.jpg
next is a closer look at the back:
http://hongkongdvdcentral.com/images/images_16632/dj%20077.jpg
next is now the 12 pin coin door make plug that i cant find the female end of:
http://hongkongdvdcentral.com/images/images_16632/dj%20079.jpg
next is a picture of the parts of that 12 pin male plug that is wired to the board:
http://hongkongdvdcentral.com/images/images_16632/dj%20080.jpg
and finally the back of the coind door:
http://hongkongdvdcentral.com/images/images_16632/dj%20081.jpg
one other thing, i went in to the marquee to get that figured out and the 3 pin mate and lock coming from the light was not hooked up, so in the back of the cab is the 3 pin mate in lock part that its suposse connect it, however the wire is not long enough. is there like an exstention cord or something i can buy to bridge the gap or do i have to get one of those kits and get tools, etc?
again, thanks very much for your help, you guys are great.