| Main > Buy/Sell/Trade - non-retail |
| WTB 6-pin molex connector |
| (1/2) > >> |
| sdrob04:
I have the following trackball... http://www.happcontrols.com/trackballs/560110xx.htm ...and would like to keep the existing AMOA harness intact (i.e. not hack it off). I need a 6-pin female molex (with metal inserts) to plug into the existing connector on the factory harness. Does anyone have one of these connectors they could sell? |
| Q*Bert_OP:
If not, try Radio Shack...they sell just that side separately,with pins... |
| shardian:
For my trackball, the radio shack molex did not match up with the existing plug. I just went ahead and bought a matching set, and switched out the existing plug for a new one. Good luck |
| sdrob04:
Thank you for the warning on the Radio Shack plug! I would not have expected more than one version of a 6-pin female molex connector. The male/female combo seems like the way to go in this case. |
| TheRed:
oh no, molex pins come in a TON of different types. The astro city cabinet's being the hardest for me to find. I have a shop local to me called HSC and they have just about every type you could think of.... ...except the right size of the Astro City type :( |
| Navigation |
| Message Index |
| Next page |