Main > Main Forum

routing control panel

Pages: (1/1)

gtnshape:

Does anyone know what the proper counter-sink depth is for joysticks on 3/4" plywood?

Auntie MAME:

I routed out the bottom on 3/4 MDF so that the joy stick base was flush with the MDF.  The height of the stick is perfect.

rhd:

I have a 3/4" CP with 1/8" lexan and routed out 1/4" for the joystick. So the CP over the joystick is 1/2" thick.

gtnshape:

Thanks so much 1/4" it is!

Pages: (1/1)

Go to full version