Main > Main Forum
New Product: Ultimarc UltraStik 360 Analog/Digital Mappable Joystick
stephenp1983:
so how exactly do the buttons connect to the control stick. You said you could have up tp eight button right?
alexandro98:
http://www.ultimarc.com/ultrastik_inst.html
here for more information, but basically cut and pasted from it...
The connections for the 10-pin header are as below:
Wire Input Mode
Black COM Connect to COM terminals on all buttons
Brown Button 1 NO
Blue Button 2 NO
Orange Button 3 NO
Yellow Button 4 NO
Green Button 5 NO
Red Button 6 NO
Grey Button 7 NO
Violet Button 8 NO
The optional wiring harness has cut wire ends which you can crimp suitable connectors onto, for your pushbuttons. There is one ground wire which you will need to daisy-chain to all COM connections on the switches so you may need additional black wire to do this.
The supplied wires are 18 inches (450mm) long.
Gh0sty:
well, it looks like this is THE all-purpose Joystick most of us have waited for,
incredible work Andy!!
stephenp1983:
Thanks for the reply, doesn't seem to hard I guess. I'll have to try this out.
southpaw13:
So it looks like it would only mount to a metal control panel. Does it work with wood?