Main > Main Forum
New Product: Ultimarc UltraStik 360 Analog/Digital Mappable Joystick
<< < (9/45) > >>
stephenp1983:
so how exactly do the buttons connect to the control stick.  You said you could have up tp eight button right?
alexandro98:
http://www.ultimarc.com/ultrastik_inst.html
here for more information, but basically cut and pasted from it...

The connections for the 10-pin header are as below:

Wire    Input Mode    
Black    COM Connect to COM terminals on all buttons    
Brown    Button 1 NO    
Blue    Button 2 NO    
Orange    Button 3 NO    
Yellow    Button 4 NO    
Green    Button 5 NO    
Red    Button 6 NO    
Grey    Button 7 NO    
Violet    Button 8 NO    

The optional wiring harness has cut wire ends which you can crimp suitable connectors onto, for your pushbuttons. There is one ground wire which you will need to daisy-chain to all COM connections on the switches so you may need additional black wire to do this.
The supplied wires are 18 inches (450mm) long.
Gh0sty:
well, it looks like this is THE all-purpose Joystick most of us have waited for,
incredible work Andy!!
stephenp1983:
Thanks for the reply, doesn't seem to hard I guess.  I'll have to try this out.
southpaw13:
So it looks like it would only mount to a metal control panel.  Does it work with wood?
Navigation
Message Index
Next page
Previous page

Go to full version