| Main > Main Forum |
| my ipac 4 not responding! |
| (1/1) |
| bossyman15:
i'm sure this question was asked but i searched and no luck. so... my i pac 4 worked before but when iplug it into my pc today NO RESPONDS!!! i replug it and restart it many times and no luck. i'm using usb and this is new version of ipac 4 ( no jumper) oh also i checked winpac and done test still no responds, made sure winpac are set to usb yes it is. i even tried pluging my keyboard into passthu but that keyboard doesn't respond. i restart my ocmp to be sure but still no. i even checked to be sure the ground wire are tight in the stocket yes it is. |
| hypernova:
Check the Ipac self-test LEDs on the board itself. If it's anything like mine, the P3/4 LED is lighting as normal, but the P1/2 isn't. If that's the case, there's a wiring problem somewhere on your CP. I think mine turned out to be somewhere along the grounding lines I had. Couldn't ever figure out where, though. |
| bossyman15:
Well once again I forgot to update my current status... Turns out I just had to plug the usb into different slot. Seems that I would have to do that every time I unplug my ipac4 |
| cdbrown:
So was that usb slot not working at all or just with the ipac? Curious to know why using the other USB slot worked. |
| bossyman15:
--- Quote from: cdbrown on June 07, 2006, 08:06:04 am ---So was that usb slot not working at all or just with the ipac? Curious to know why using the other USB slot worked. --- End quote --- i don't know why. my computer are weird. everything i own are weird i dunno why. i must be cursed. |
| Navigation |
| Message Index |