| Main > Main Forum |
| Solderless crimp connections for microswitches |
| << < (2/2) |
| SirPeale:
--- Quote from: JonnyBoy on June 04, 2006, 08:23:33 pm ---The tool will work fine for crimping, but it's awful for stripping. If it's just a few buttons it'll do but it really is worth it to get something else to strip wires. --- End quote --- One of the automatic wire strippers works well. However, I've never had an issue stripping with my crimpers. You insert wire, squeeze, release *slightly*, turn, and pull. |
| DaveJ-UK:
Thanks for the replies. Yes I am in the UK :) I can't find anything in the UK by the same names that have been mentioned but these are what I've ordered: Crimp Terminal, Female Push On Receptacle 6.3mm (PK 10) Crimp Terminal Cover, Female, FASTON Clear (Pack of 10) I'm pretty sure that will do the job. I know that tool isn't great for stripping. I've actually got several sets including some automatic strippers but I always seem to misplace them and end up using the next best ::) |
| Orclord:
I wish I had read your first post in greater depth.... If you only wanted 10 I could have sent them to you by post FOC of course.. And I would not have bothered with the insulation, I only use that type on 240v connections. |
| Navigation |
| Message Index |
| Previous page |