Main > Main Forum
Unresponsive Microswitches
shbon:
I think this thread did actually refer to an isolated IPAC issue... Read this thread over at the Ultimarc Board :
http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=76627&page=0&view=expanded&sb=5&o=&fpart=1&vc=1
Shaun
hanelyp:
My initial thought was that if a button is pressed and released fast enough the signal could fall between samples on that input and be missed, or maybe too brief a press with enough switch and wire resistance might not pull the signal far enough to register. The latter might be fixed by double checking all contacts and cleaning the switch.