Main > Buy/Sell/Trade - non-retail
Monitor mounting brackets, UK, Where?
Pages: (1/1)
lettuce:
Where can i get a set of 4 Monitor mounting brackets here in the UK?
grantspain:
go to wickes buy some angle iron and make them yourself,its cheaper and faster
mccoy178:
I made some and show how on page six of my project thread. Click the pic below if you're interested.
lettuce:
--- Quote from: mccoy178 on June 02, 2006, 08:21:10 pm ---I made some and show how on page six of my project thread. Click the pic below if you're interested.
--- End quote ---
Can u go into more detail of how you managed to scure the monitor to the bracket, as its not very clear
mccoy178:
I bought a 1" square tube piece of steel, a 12x16 sheet of 18 gauge metal, and a 1/4"x2"x24" piece of aluminum. I cut the 2" strip into smaller pieces. I dog eared them so they wouldn't hit the t.v., yet still be in line with the holes. I drilled holes the same size as the holes on the built in brackets on the monitor. Once I had those 2" strips the way I wanted them, I clamped them to the 1" bar where they would need to be located to fit, and drilled and bolted them to the tubing. Once I had all four pieces secured to the two sections of tube, I just bolted them to the monitor. After that, I added the plate on the bottom by bending the angle of the sheet, clamping it in place, and again drilling and bolting. I guess, in summary, take your time in measuring, making sure everything fits properly, then drill away. It is more then sturdy enough for what it is doing.
Pages: (1/1)