Main > Main Forum

Help with a Hagstrom KE72 or Mame32 Conf

Pages: (1/1)

Zinfari:

I've got a hagstrom KE72 and I'm having some difficulties with is and was wondering if I'm just missing something in the Mame32 config.

I have mapped up, left, right, down to A, B, C, D (for testing since A-D are mapped to the first 4 inputs on the Hagstrom and I wanted to test it out before sitting down to do the config.) respectively in MS-Pacman. I have a Happ Super hooked up and at least in notepad all the inputs apprear to be firing just fine (which is why I think this is a mame config issue). The problem is that when I attempt to play MS-Pacman the inputs don't fire consistantly. I can only get movement about 1 in 10 pushes of the jokstick (maybe less but eventually it does go). Is there some config in Mame32 I'm missing?

Thanks,
Zinfari

Sasquatch!:

Are you sure you don't have anything else mapped to ABCD?

Zinfari:

I just double checked and I had missed one D... but I removed that and still the same thing. I guess I'll program the KE72 inputs to be the arrow keys and see if that makes a difference... I can't do that until tomorrow unfortunately since I forgot to grab a 9pin serial cable.

If anyone thinks of anything else let me know.

-Zinfari

Shadowfire:

Make sure you're directing the KE72 to hold the key down as long as the input line is high, i.e.

IN01:[(+)A]
IN01|[(-)A]
IN02:[(+)B]
IN02|[(-)B]
IN03:[(+)C]
IN03|[(-)C]
IN04:[(+)D]
IN04|[(-)D]

Zinfari:

Thanks for the reply. I think I have it taken care of, but it was very odd. As long as I used the default config (i.e. input 1=A, input 2=B, etc) I was having a problem. However once I actually downloaded a config everything started working fine other than input 1 which was fried. So I think the real issue was probably something to do with the chip that the first input was using. Once I downloaded 2-72 worked great. Support at Hagstrom was good, they walked me through a few things then told me to send it back.

-Zinfari

Pages: (1/1)