Main > Main Forum

Golden Tee Golf LED Marquee

Pages: << < (2/2)

Ken Layton:

That LED sign plugged into a connector specifically for it on the Golden Tee Golf's main gameboard. Then another connector on the gameboard plugged into a modem mounted in the cabinet. From that modem then was plugged into a phone line.

The messages the sign displays are downloaded to the gameboard by the game manufacturer, www.itsgames.com

I would suggest you contact tech support at the game manufacturer for more information on this sign assembly and how to connect/program it. I believe the circuit board inside the sign has a special socketed eprom chip programmed especially for Incredible Technologies so that the sign always looks for commands from a Golden Tee golf circuit board.

neilthomas147:

Thank you for replying so quickly, what do you think my chances are of them letting me know how to do it?

Again thanks for your help

 :notworthy:

mccoy178:

I would think it would be hard to get that to work with mame.  I would recommend a regular betabright sign with a comm1 port on it and place it where the GT LED is. 


Also, PM Silver on this topic.  He knows a bit about the LED's.

Ken Layton:


--- Quote from: neilthomas147 on May 30, 2006, 11:10:17 am ---Thank you for replying so quickly, what do you think my chances are of them letting me know how to do it?



--- End quote ---

I've always had good luck with the tech support dept there. You could also contact the moving message sign manufacturer too.

Pages: << < (2/2)

Go to full version