| Main > Main Forum |
| Golden Tee Golf LED Marquee |
| << < (2/2) |
| Ken Layton:
That LED sign plugged into a connector specifically for it on the Golden Tee Golf's main gameboard. Then another connector on the gameboard plugged into a modem mounted in the cabinet. From that modem then was plugged into a phone line. The messages the sign displays are downloaded to the gameboard by the game manufacturer, www.itsgames.com I would suggest you contact tech support at the game manufacturer for more information on this sign assembly and how to connect/program it. I believe the circuit board inside the sign has a special socketed eprom chip programmed especially for Incredible Technologies so that the sign always looks for commands from a Golden Tee golf circuit board. |
| neilthomas147:
Thank you for replying so quickly, what do you think my chances are of them letting me know how to do it? Again thanks for your help :notworthy: |
| mccoy178:
I would think it would be hard to get that to work with mame. I would recommend a regular betabright sign with a comm1 port on it and place it where the GT LED is. Also, PM Silver on this topic. He knows a bit about the LED's. |
| Ken Layton:
--- Quote from: neilthomas147 on May 30, 2006, 11:10:17 am ---Thank you for replying so quickly, what do you think my chances are of them letting me know how to do it? --- End quote --- I've always had good luck with the tech support dept there. You could also contact the moving message sign manufacturer too. |
| Navigation |
| Message Index |
| Previous page |