Main > Main Forum
Perfect 360 Installation Question
phantompower:
I have, what appears to be, a strange situation...I have installed my Perfect 360s, and they work well in all directions, however, when in the neutral position and not in use, they are very wiggly and loose. Not sitting firm in the neutral position.
Both joysticks are this way so I am inclined to think they may have been installed incorrectly and not a flaw in the sticks.
Any assistance here would be great. I have the Happs sticks and can easily get replacements if that's the answer.
Thanks
Chuck
phantompower:
I have since, figured out what the issue is (I think)...Here is a copy and paste from the email I sent to Happ Technical Support:
"I am having issues with the two Perfect 360s I purchased last week. They are now installed as they need to be, but the issue may be an incorrect part with the stick. In the past, I have constucted several cabinets and controls with Ultimate joysticks, Competition joysticks, and Super joysticks
DeathMonk:
I have had my P360's for about a month and a half now. I have no problem with any sort of play in the neuteral position. In fact, they're quite stiff--even more so before they were broken in. Could it be a defect..
phantompower:
I hope it is a defect and not a design change. Only thing that has me concerned is the same clearance is in the sleeve of both bases.
phantompower:
Well, it turns out that I was the problem. I was not pushing on the stick hard enough to get the groove where the E-ring goes to clear the bottom of the sleeve in the base.
I have since reinstalled the sticks and everything works fine. Thanks to all who provided assistance.
Chuck