| Main > Main Forum |
| Do you think a two part epoxy will hold my aluminum cp to an mdf backing? |
| (1/3) > >> |
| mccoy178:
http://www2.towerhobbies.com/cgi-bin/wti0001p?Q=&I=LXC025#tech I plan on using this product to hold my metal cp to an mdf backing. I have a bunch of "c" clamps to use. Do you think this will stand the test of time? I don't want any bolts showing through the top and by routing out the mdf, it can hold everything like I need it in case anything needs replaced. |
| mccoy178:
Uh, I'm really tired. Could a mod please move this to the main forum? :banghead: |
| SirPeale:
--- Quote from: mccoy178 on April 22, 2006, 02:15:34 am ---Mods are all jerks and hooligans, move my thread now now now now! :banghead: --- End quote --- Banned for abuse. |
| TOK:
Definitely. Lightly scuff up both the panel and the MDF. I've used that same stuff on a number of different materials and it's very strong. Have a couple of large paint brushes ready. Once it starts to harden, it will "pull" and be harder to apply evenly. For doing large areas, I gloop it on a large piece of wax paper and work from that. |
| mccoy178:
Excellent! Thanks for the advice! --- Quote from: Peale on April 22, 2006, 04:26:10 pm --- --- Quote from: mccoy178 on April 22, 2006, 02:15:34 am ---Mods are all jerks and hooligans, move my thread now now now now! :banghead: --- End quote --- Banned for being a pimp. --- End quote --- Thanks Peale! Can I have one of those donuts? |
| Navigation |
| Message Index |
| Next page |